# Kiwiplan - Sheet Plant VUE Master Parameters

### Master Data Parameters for a VUE Sheet Plant

This is used to know where the parameter take affect in either VUE or Classic

<table border="0" cellpadding="0" cellspacing="0" id="bkmrk-sheet-plants-%C2%A0-%C2%A0-set" style="border-collapse: collapse; width: 860pt;" width="1144"><colgroup><col style="mso-width-source: userset; mso-width-alt: 4278; width: 88pt;" width="117"></col> <col style="mso-width-source: userset; mso-width-alt: 6070; width: 125pt;" width="166"></col> <col style="mso-width-source: userset; mso-width-alt: 2121; width: 44pt;" width="58"></col> <col style="mso-width-source: userset; mso-width-alt: 2267; width: 47pt;" width="62"></col> <col style="mso-width-source: userset; mso-width-alt: 14445; width: 296pt;" width="395"></col> <col style="mso-width-source: userset; mso-width-alt: 12653; width: 260pt;" width="346"></col> </colgroup><tbody><tr style="height: 15.0pt;"><td class="xl79" colspan="6" height="20" style="height: 15.0pt; width: 860pt;" width="1144">Sheet Plants / Box Plant Full VUE</td></tr><tr style="height: 15.0pt;"><td class="xl79" height="20" style="height: 15.0pt;"> </td><td class="xl79"> </td><td class="xl80" colspan="2">Setup In</td><td class="xl79"> </td><td class="xl79"> </td></tr><tr style="height: 15.0pt;"><td class="xl65" height="20" style="height: 15.0pt;">Parameter</td><td class="xl65" style="border-left: none;">Description</td><td class="xl65" style="border-top: none; border-left: none;">Classic</td><td class="xl65" style="border-top: none; border-left: none;">VUE</td><td class="xl65" style="border-left: none;">Option</td><td class="xl65" style="border-left: none;">Comments</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CORR-BB</td><td class="xl67" style="border-top: none; border-left: none;">Board Codes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Material &gt; Material Group &gt; Board Group</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CORR-CT</td><td class="xl67" style="border-top: none; border-left: none;">Score Codes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Organization &gt; Score Types</td><td class="xl69" style="border-top: none; border-left: none;">Make sure default in VUE is set but also set CORR-CP &amp; PCS-QB</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CORR-CP &amp; PCS-QB</td><td class="xl67" style="border-top: none; border-left: none;">Default Score Code</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Organization &gt; Score Types &amp; PCS-QB &amp; CORR-CP</td><td class="xl69" style="border-top: none; border-left: none;">Make sure that classic has the default <span class="font5">converting</span><span class="font0"> score set</span></td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CORR-FL</td><td class="xl67" style="border-top: none; border-left: none;">Flutes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Flute Types</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CSC-BS</td><td class="xl67" style="border-top: none; border-left: none;">Board Structure</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Material Group &gt; Board Group</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CSC-PC</td><td class="xl67" style="border-top: none; border-left: none;">Paper Classes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl70" style="border-top: none; border-left: none;">Not required for sheetplants</td><td class="xl70" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CSC-UD</td><td class="xl67" style="border-top: none; border-left: none;">Unit Descriptions</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Order &gt; Groups</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-QC</td><td class="xl67" style="border-top: none; border-left: none;">Downtime Classes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Downtime &gt; Downtime Classes</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-SN</td><td class="xl67" style="border-top: none; border-left: none;">Shipper types</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Shippers &amp; GEN-SN</td><td class="xl69" style="border-top: none; border-left: none;">VUE only needed for COMMS. Classic for everything else</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-TB</td><td class="xl67" style="border-top: none; border-left: none;">Top Boards</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Top Board</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-TU</td><td class="xl67" style="border-top: none; border-left: none;">Pallets</td><td class="xl68" style="border-top: none; border-left: none;"><span style="mso-spacerun: yes;"> </span></td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Pallets

Materials &gt; Unit Load Types &lt; -- After version 10 Box Plant

</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-UM</td><td class="xl67" style="border-top: none; border-left: none;">Units of Measure</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Parameters &gt; Manufacturing &gt; COMMS &amp; GEN-UM</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-UP</td><td class="xl67" style="border-top: none; border-left: none;">Label/Sample Placement</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl66" style="border-top: none; border-left: none;">GEN-UP</td><td class="xl69" style="border-top: none; border-left: none;">Not used in VUE but stored on the <span class="font5">unitising </span><span class="font0">table</span></td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">GEN-WC</td><td class="xl67" style="border-top: none; border-left: none;">Waste Classes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Waste - Categories</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">INV-SM</td><td class="xl67" style="border-top: none; border-left: none;">Shipment Method</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl66" style="border-top: none; border-left: none;">INV-SM</td><td class="xl69" style="border-top: none; border-left: none;">Not used in VUE but stored on the <span class="font5">shipmethod </span><span class="font0">and </span><span class="font5">job </span><span class="font0">table</span></td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-CC</td><td class="xl67" style="border-top: none; border-left: none;">Closure Codes</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Machine &gt; Closure Codes</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-CE</td><td class="xl67" style="border-top: none; border-left: none;">Flap Types</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Machine &gt; Closure Type</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS/GEN-CM/CN</td><td class="xl67" style="border-top: none; border-left: none;">Communications</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;"><span style="mso-spacerun: yes;"> </span></td><td class="xl66" style="border-top: none; border-left: none;">PCS-CN, GEN-CM, GEN-CN</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-FB</td><td class="xl66" style="border-top: none; border-left: none;">Feedback</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Parameters &gt; PCS &gt; Feedback</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-IC<span style="mso-spacerun: yes;"> </span></td><td class="xl67" style="border-top: none; border-left: none;">Inks &amp; Coatings</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Material Group &gt; Ink types</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-PD</td><td class="xl67" style="border-top: none; border-left: none;">Tooling Definitions</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Tool &gt; Tool Types &amp; PCS-PD</td><td class="xl69" style="border-top: none; border-left: none;">VUE needs these for tooling but ESP reads classic for type</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QD</td><td class="xl67" style="border-top: none; border-left: none;">Tooling Die Status</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Tool &gt; Tool Statuses</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QS</td><td class="xl67" style="border-top: none; border-left: none;">Tooling Print Status</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Tool &gt; Tool Statuses</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QE</td><td class="xl67" style="border-top: none; border-left: none;">Machine Groups</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Organization &gt; Machine Groups &amp; PCS-QE</td><td class="xl69" style="border-top: none; border-left: none;">Classic &amp; ESP reads the group description from classic</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QK</td><td class="xl67" style="border-top: none; border-left: none;">Machine Operations</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Machine &gt; Machine Operations &amp; PCS-QK</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QO</td><td class="xl67" style="border-top: none; border-left: none;">Order Status</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Order &gt; Hold Statuses</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">CSC-OS</td><td class="xl67" style="border-top: none; border-left: none;">Order Status</td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Configuration &gt; Order &gt; Hold Statuses</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">PCS-QP</td><td class="xl67" style="border-top: none; border-left: none;">PCS-QP</td><td class="xl68" style="border-top: none; border-left: none;"><span style="mso-spacerun: yes;"> </span></td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl70" style="border-top: none; border-left: none;">Not required for sheetplants</td><td class="xl70" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl71" height="20" style="height: 15.0pt; border-top: none;">PCS-SW</td><td class="xl72" style="border-top: none; border-left: none;">Slot Widths</td><td class="xl73" style="border-top: none; border-left: none;"> </td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl71" style="border-top: none; border-left: none;">Configuration &gt; Machine &gt; Slot WidthCodes</td><td class="xl74" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl81" colspan="5" height="20" style="height: 15.0pt;">Data Fields</td><td class="xl82" style="border-top: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Papers</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl70" style="border-top: none; border-left: none;">Not required for sheetplants</td><td class="xl70" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Starch</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl70" style="border-top: none; border-left: none;">Not required for sheetplants</td><td class="xl70" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Board Grades</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Corrugated Boards</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Coatings</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Coatings</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Inks</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Materials &gt; Inks</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl67" height="20" style="height: 15.0pt; border-top: none;">Ink Groups</td><td class="xl67" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Materials &gt; Material Group &gt; Ink Groups</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl72" height="20" style="height: 15.0pt; border-top: none;">Locations</td><td class="xl72" style="border-top: none; border-left: none;"> </td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl71" style="border-top: none; border-left: none;">Configuration &gt; Organization &gt; Plant &gt; Stores and invmenu</td><td class="xl74" style="border-top: none; border-left: none;">Only machine in and out feed locations need to be in VUE</td></tr><tr style="height: 15.0pt;"><td class="xl71" height="20" style="height: 15.0pt; border-top: none;">Stores</td><td class="xl72" style="border-top: none; border-left: none;"> </td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl71" style="border-top: none; border-left: none;">Configuration &gt; Organization &gt; Plant &gt; Stores and invmenu</td><td class="xl74" style="border-top: none; border-left: none;">Only machine in and out feed locations need to be in VUE</td></tr><tr style="height: 15.0pt;"><td class="xl75" height="20" style="height: 15.0pt; border-top: none;">Label Formats</td><td class="xl76" style="border-top: none; border-left: none;"> </td><td class="xl77" style="border-top: none; border-left: none;">Yes</td><td class="xl77" style="border-top: none; border-left: none;">Yes</td><td class="xl78">Configuration &gt; KDG Templates &amp; lbs00:A</td><td class="xl75" style="border-top: none;">Just code needs to exist in classic, label defined in VUE</td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Machines</td><td class="xl67" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-left: none;">Configuration &gt; Organization &gt; Plant &gt; Machines</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Shift Names</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Calendars &gt; Shift Names</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl66" height="20" style="height: 15.0pt; border-top: none;">Calendars</td><td class="xl66" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;"> </td><td class="xl68" style="border-top: none; border-left: none;">Yes</td><td class="xl66" style="border-top: none; border-left: none;">Calendars &gt; Calendars</td><td class="xl69" style="border-top: none; border-left: none;"> </td></tr><tr style="height: 15.0pt;"><td class="xl71" height="20" style="height: 15.0pt; border-top: none;">Purchase Category</td><td class="xl71" style="border-top: none; border-left: none;"> </td><td class="xl73" style="border-top: none; border-left: none;"><span style="mso-spacerun: yes;"> </span></td><td class="xl73" style="border-top: none; border-left: none;">Yes</td><td class="xl71" style="border-top: none; border-left: none;">PICS and ESP</td><td class="xl74" style="border-top: none; border-left: none;">Must enter in ESP and PICS and must match</td></tr></tbody></table>